DT: Dental Technology
Core Outcomes Mapping
Mapping Level Indicators
- 0: Not Applicable.
- 1: Limited demonstration or application of knowledge and skills.
- 2: Basic demonstration and application of knowledge and skills.
- 3: Demonstrated comprehension and is able to apply essential knowledge and skills.
- 4: Demonstrates thorough, effective and/or sophisticated application of knowledge and skills.
SAC – DT: Dental Technology
Core Outcomes
- Communication.
- Community and Environmental Responsibility.
- Critical Thinking and Problem Solving.
- Cultural Awareness.
- Professional Competence.
- Self-Reflection.
Course # | Course Name | CO1 | CO2 | CO3 | CO4 | CO5 | CO6 |
---|---|---|---|---|---|---|---|
DT 101 | Dental Technology Lab I | 1 | 0 | 1 | 0 | 1 | 0 |
DT 102 | Dental Technology Lab II | 1 | 0 | 2 | 0 | 2 | 0 |
DT 103 | Dental Technology Lab III | 2 | 0 | 2 | 0 | 3 | 0 |
DT 120 | Dental Anatomy | 0 | 0 | 0 | 0 | 1 | 0 |
DT 141 | Denture Techniques I | 1 | 0 | 0 | 0 | 1 | 0 |
DT 142 | Denture Techniques II | 2 | 0 | 0 | 0 | 2 | 0 |
DT 151 | Science of Dental Materials I | 1 | 0 | 0 | 0 | 0 | 0 |
DT 152 | Science of Dental Materials II | 2 | 0 | 0 | 0 | 2 | 0 |
DT 204 | Dental Technology Lab IV | 3 | 0 | 3 | 0 | 4 | 0 |
DT 205 | Dental Technology Lab V | 3 | 0 | 3 | 0 | 4 | 0 |
DT 206A | Dental Technology Lab VI (Fabrication Ortho Appliances) | 1 | 0 | 3 | 0 | 4 | 0 |
DT 206B | Dental Technology Lab VII (CAD/CAM & Implant Restorations) | 0 | 0 | 3 | 0 | 2 | 0 |
DT 253 | Science of Dental Materials III | 0 | 0 | 0 | 0 | 3 | 0 |
DT 254 | Science of Dental Materials IV | 0 | 0 | 0 | 0 | 3 | 0 |
DT 270 | Inlay Casting, Crown & Bridge | 0 | 0 | 0 | 0 | 3 | 0 |
DT 271 | Partials, Immediate & Overdentures | 2 | 0 | 0 | 0 | 3 | 0 |
DT 272 | Dental Ceramics | 0 | 0 | 0 | 0 | 3 | 0 |
DT 275 | Dental Laboratory Management | 2 | 2 | 2 | 1 | 3 | 0 |
DT 276 | Dental Laboratory Management Lab | 4 | 4 | 4 | 3 | 4 | 3 |
DT 284 | Dental Specialties | 2 | 3 | 0 | 3 | 0 | 3 |
DT 286 | DT Registered Graduate Preparation | 3 | 0 | 0 | 0 | 3 | 2 |
DT 287 | Intro to CAD/CAM Technology & Dental Implant Systems | 0 | 0 | 0 | 0 | 3 | 0 |
Updated February 2016