Agenda 1-14-2004
Curriculum Gen Ed Committee of the Educational Advisory Council
Agenda
January 14, 2004 (AMENDED DATE)
Sylvania Campus, 3:00-5:00 pm
Spruce Room
Old Business:
266. CAS 208 BEGINNING PHOTOSHOP FOR THE WEB – NEW COURSE
1 lec, 4 lec/lab, 3 cr
New course description: Introduces the basic painting and drawing features in Adobe Photoshop to create and refine graphics for web sites. Covers basic painting and drawing tools, and exports options for the web. Emphasis is on learning the Photoshop interface efficiently. Recommended: MM 120 and one of the following: CAS 111D or CAS 111F or CAS 206 or equivalent.
Introduces basic painting and drawing features in Adobe Photoshop to create and refine graphics for websites. Covers basic painting and drawing tools, and export options for the web. Emphasizes learning the Photoshop interface efficiently. Recommended: (CAS 111D or 111F), or CAS 206; or equivalent.
30 character short title for student transcript: Begin Photoshop for the Web
Requested implementation term: 200304
After intensive discourse and no consensus of involved SACs, it was the recommendation of the Curriculum/GenEd Committee that the Computer Application Systems and Multimedia SACs meet to bring clarity to what each SAC represents and the parameters of their departments.
New Business:
99. PHL 206 INTRODUCTION TO ENVIRONMENTAL ETHICS – NEW COURSE
3 lec, 3 cr
Investigates the ethical questions that pertain to human choices regarding the environment. Some of the questions addressed include: Do non-human animals have rights? What is the environment and do we have an obligation to protect it? What is the proper ethical balance between economic and environmental concerns regarding natural resources? Does the present generation have an ethical obligation to preserve a healthy environment for future generations? Recommended: College level reading and writing.
30 Character title for student transcript – Intro to Environmental Ethics
Requested implementation term: 200404
100. HIM 285 HEALTHCARE FINANCING AND COMPLIANCE – NEW COURSE and DISTANCE MODALITY PROPOSAL
3 lec, 3 cr
Covers the financing of healthcare services and the methods of reimbursement for those services. Includes healthcare compliance programs and activities.
Requested implementation term: 200403
101. CJA 214 CRIMINAL INVESTIGATION – COURSE DESCRIPTION CHANGE
Withdrawn by originator until February meeting.
102. AMT 213 HYDRAULICS, PNEUMATICS AND LANDING GEAR – COURSE TITLE CHANGE
Current title: Hydraulic Systems & Landing Gear
30 character title for student transcript: Hyd, Pneum, & Landing Gear
Requested implementation term: 200402
103. RE 241 RE BROKERAGE ADMINISTRATION AND SALES SUPERVISION – COURSE TITLE CHANGE, COURSE CREDIT/CONTACT HOUR CHANGE
Current title: Real Estate Office Management/Supervision of Sales Persons
Proposed Credit/Contact Hour: 4 lec, 4 cr
Current Credit/Contact Hour: 3 lec, 3 cr
30 character title for student transcript: RE Broker Admin & Sales Supervsn
Requested implementation term: 200404
104. RE 226 REAL ESTATE INVESTMENTS-ADVANCED – COURSE TITLE CHANGE
Current title: Real Estate Finance II
Requested implementation term: 200404
105. MCH 101 OCCUPATIONAL HEALTH & SAFETY – NEW COURSE
6 lec/lab, 3 cr
Provides and introduction to the concepts of industrial health and safety regulations, compensation laws, and profitability of safety management. Prerequisite: MCH 100.
Requested implementation term: 200402
106. MCH 121 MANUFACTURING PROCESSES I – NEW COURSE
6 lec, 4 lec/lab, 4 cr
Introductory course in material removal operations emphasizing drilling, milling and lathe processes with emphasis on production speeds and feeds. Prerequisite: MCH 102
Requested implementation term: 200402
107. MCH 220 MANUFACTURING PROCESSES II – NEW COURSE
3 lab, 6 lec/lab, 4 cr
Covers the interaction of design with industrial materials and processes in connection with technical and economic feasibility, trade-offs and automation. Prerequisite: MCH 121
Requested implementation term: 200402
108. MCH 246 METALLURGY II – NEW COURSE
8 lec/lab, 4 cr
Covers selection of materials for modern engineering and technology applications; structure and properties of materials starting with fundamental atomic arrangements; microstructural control through thermal and mechanical processing and effects of service environment. Prerequisite: MCH 245
Requested implementation term: 200402
109. MCH 247 MANUFACTURING PROCESSES III – NEW COURSE
6 lec/lab, 3 cr
Introduces less conventional and non-traditional manufacturing processes and materials. Prerequisite: MCH 220
Requested implementation term: 200402
110. MCH 248 METALLURGY III – NEW COURSE
6 lec/lab, 3 lab, 4 cr
Covers the selection of materials for modern engineering and technology applications; structure and properties of ceramics, polymers, composities; the materials properties of electrical, thermal, magnetic; and the economic, environmental and societal issues in materials science and engineering. Prerequisite: MCH 246
Requested implementation term: 200402
111. MCH 286 CERTIFIED ENTERPRISE INTEGRATOR REVIEW – NEW COURSE
8 lec/lab, 4 cr
Provides a review of the material to prepare for the Society of Manufacturing Engineers (SME) Certification Test for the Certified Enterprise Integrator (CEI).
30 character title for student transcript:
Requested implementation term: 200402
112. MCH 287 CERTIFIED ENGINEERING MANAGER REVIEW – NEW COURSE
Provides a review of the material to prepare for the Society of Manufacturing Engineers (SME) Certification Test for the Certified Engineering manager (CEM).
30 character title for student transcript: Engineering Manager Review
Requested implementation term: 200402
113. MCH 221 GEARS – NEW COURSE
4 lec/lab, 2 cr
Covers part drawings with gears which provide the technician with a complete description of size, shape, feature location, special tolerances, finish treatments, and assembly instructions so that the product can be manufactured, inspected, assembled and tested to exact design specifications. Prerequisite: MCH 215
Requested implementation term: 200402
114. MCH 222 COORDINATE MEASURING MACHINE OPERATION – NEW COURSE
4 lec/lab, 2 cr
Covers the roles and types of CMMs; modes of operation; types of probes; CMM software; measuring features; alignments and reverse engineering (digitizing). Prerequisite: MCH 115.
Requested implementation term: 200402
115. MCH 224 QUALITY ANALYST – NEW COURSE
6 lec/lab, 3 cr
Quality Analyst is a software application that enhances statistical quality control processes to setup, create, and interpret control charts. Prerequisites: MCH 216, 217.
Requested implementation term: 200402
116. MCH 228 ABRASIVES – NEW COURSE
3 lec/lab, 1.5 cr
Covers the different types of abrasives available, selection and their applications. Prerequisite: MCH 215
Requested implementation term: 200402
117. AMT 101 INTRODUCTION TO A&P – CREDIT/CONTACT HOUR CHANGE, COURSE DESCRIPTION CHANGE, PREREQUISITE CHANGE, LEARNING OUTCOME CHANGE REQUESTS
Proposed Credit/Contact Hour Change: 10 lec (10 hours) 1 cr
Current Credit/Contact Hour Change: 30 lec/lab, 4 cr
Proposed Course Description: Familiarization with aviation maintenance technology, including: program requirements, safety, aircraft and engines, general-purpose common hand tools, work ethics and career opportunities. This course is a prerequisite for all other AMT courses.
Current Course Description: Familiarization with aviation maintenance technology, including program requirements, safety, aircraft and engines, general-purpose common hand tools, power tools, shop equipment, precision measuring tools, construction of aircraft parts, aircraft hardware, work ethics and career opportunities.
Proposed Prerequisites: None
Current Prerequisites: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher.
Proposed Learning Outcomes: see attached
Requested implementation term: 200403
118. AMT 102 AIRCRAFT ELECTRICITY I – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisites: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
119. AMT 105 AVIATION CFRs & RELATED SUBJECTS – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
120. AMT 106 AIRCRAFT APPLIED SCIENCE – COURSE DESCRIPTION CHANGE, PREREQUISITE CHANGE, LEARNING OUTCOME CHANGE REQUESTS
Proposed Course Description: Covers aircraft weight and balance procedures and associated record keeping. Also covers aircraft drawings, precision measuring tools and some basic principles of physics.
Current Course Description: Existing math and science skills are used to perform operations in aircraft maintenance and record keeping. Also covers some basic principles of aviation related physics.
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher.
Learning Outcomes Change – see attached.
Requested implementation term: 200403
121. AMT 107 MATERIALS & PROCESSES – COURSE DESCRIPTION CHANGE, PREREQUISITE CHANGE, LEARNING OUTCOME CHANGE REQUESTS
Proposed Course Description: Covers several general aircraft maintenance subjects including power tools, shop equipment, aircraft hardware, fluid lines and fittings, non-destructive testing methods, heat treatment, aircraft cleaning, and corrosion control.
Current Course Description: Covers many general aircraft procedures, including: fluid lines and fittings, non-destructive testing methods, heat treatment, aircraft cleaning, and corrosion control. These procedures are equally applicable to both the airframe and powerplant courses. Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher.
Proposed Prerequisite change: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher.
Learning Outcomes Change – see attached.
Requested implementation term: 200403
122. AMT 109 ASSEMBLY & RIGGING – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
123. AMT 110 AIRCRAFT FINISHES & WELDING – COURSE INACTIVATION
Does not require Curriculum Committee deliberation.
Requested implementation term: 200304
124. AMT 115 AIRCRAFT STRUCTURES & INSPECTIONS – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
125. AMT 117 RECIPROCATING ENGINE THEORY & MAINTENANCE – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
126. AMT 120 PROPELLERS & ENGINE INSTALLATION -PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
127. AMT 121 TURBINE ENGINE THEORY & MAINTENANCE – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
128. AMT 123 IGNITION SYSTEMS – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
129. AMT 124 FUEL METERING SYSTEMS – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
130. AMT 203 AIRCRAFT ELECTRICITY II – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
131. AMT 204 AIRCRAFT ELECTRICITY III – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
132. AMT 208 AIRCRAFT SYSTEMS – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
133. AMT 211 COMPOSITE STRUCTURES – PREREQUISITE CHANGE, LEARNING OUTCOME CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Learning Outcome change: see attached.
Requested implementation term: 200403
134. AMT 212 SHEET METAL – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
135. AMT 213 HYDRAULICS, PNEUMATICS, & LANDING GEAR – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
136. AMT 214 INSTRUMENTS, COMMUNICATION, & NAVIGATION SYSTEMS – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
137. AMT 216 A&P PRACTICUM/AIRFRAME – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
138. AMT 218 POWERPLANT INSPECTION – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
139. AMT 219 TURBINE ENGINE OVERHAUL – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
140. AMT 222 RECIPROCATING ENGINE OVERHAUL – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101 with a C or higher.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher; MTH 60 or higher
Requested implementation term: 200403
141. AMT 225 A&P PRACTICUM/POWERPLANT – PREREQUISITE CHANGE
Proposed Prerequisite: Placement into RD 90 or higher; placement into WR 90 or higher; AMT 101with a C or higher; completion of all General and Powerplant courses or FAA permission granted under 14 CFR Part 65 to take mechanic certification testing on an experience basis, or permission obtained from the Department Chair.
Prerequisite/Concurrent registration: MTH 60, or instructor permission.
Current Prerequisite: Placement into RD 90 or higher; WR 90 or higher: MTH 60 or higher; completion of all General and Powerplant courses, or FAA permission granted under FAR Part 65 to take mechanic certification testing on an experience basis, or permission obtained from the Department Chair.
Requested implementation term: 200403
142. WLD 210 AVIATION WELDING – NEW COURSE
5 lec/lab, 2 cr
Develop knowledge and manipulative skills with oxy-acetylene welding, torch brazing, and gas tungsten arc welding processes on steel and aluminum when performing various welds. Training will conform to current FAA 14CFR Part 147 requirements.
Prerequisites: Placement into RD 90 or higher; placement into WR 90 or higher; MTH 60 or higher; AMT 101 with a C or higher.
Requested implementation term: 200403
143. GE 221 ELECTRICAL CIRCUITS I – PREREQUISITE CHANGE
Proposed Prerequisite: PHY 213; GE 101; MTH 252.
Current Prerequisite: GE 101; MTH 252.
Requested implementation term: 200501