Approved electives
Classes must be taken in-person only. Online and Hybrid classes are not approved. For full term elective requirements you must select a course that is at least 30+ hours. Must meet prerequisites for classes listed. For prerequisite questions for APR, FMT & ELT please contact apprenticeship admin.
MPE
MA #1080 Metro Manufacturing Plant Electrician (MPE) JATC approved elective list
| Course # | Title | Approximate Hours | Credits |
|---|---|---|---|
| APR 101 | LME: Electrical Theory Fundamentals | 33 hours | 3 |
| APR 102 | LME: DC Motors | 33 hours | 3 |
| APR 103 | LME: AC Motors and Transformers | 44 hours | 4 |
| APR 104 | LME: Luminaires and Equipment | 33 hours | 3 |
| APR 160 | Intro to Industrial Maintenance | 44 hours | 4 |
| APR 162 | Calculations for the Trades | 40 hours | 4 |
| APR 164 | Industrial Blueprints and Schematics for the Trades | 30 hours | 2 |
| APR 166 | Industrial Rigging | 33 hours | 2 |
| APR 168 | Intro to Bearings, Seals and Lubrication | 33 hours | 2 |
| APR 170 | Power Transmission Systems | 33 hours | 3 |
| APR 172 | Introduction to Hydraulics | 30 hours | 3 |
| APR 202 | LME: Electrical Code – Level l | 44 hours | 4 |
| APR 203 | LME: Electrical Code – Level ll | 44 hours | 4 |
| APR 204 | LME: Electrical Code – Level lll | 44 hours | 4 |
| APR 227 | NEC Review and Exam Preparation | 33 hours | 3 |
| APR 230 | National Electrical Code | 33 hours | 3 |
| APR 260 | Pneumatic System Operations | 40 hours | 4 |
| APR 264 | Mechanical Drive Alignment | 33 hours | 3 |
| APR 266 | Predictive Maintenance Technologies | 44 hours | 4 |
| APR 268 | Industrial Equipment Controls | 33 hours | 3 |
| APR 272 | Machining for Industrial Maintenance | 33 hours | 3 |
| APR 274 | HVAC, Steam and Hot Water Systems | 44 hours | 4 |
| BCT 104 | Construction Math | 33 hours | 3 |
| BCT 106 | Hand/Power Tool Use and Safety | 33 hours | 3 |
| BCT 150 | Mechanical, Electrical and Plumbing | 40 hours | 4 |
| BCT 213 | Commercial Print Reading | 33 hours | 3 |
| CADD 100 | CADD Orientation | 30 hours | 3 |
| CADD 126 | Intro to AutoCAD | 40 hours | 3 |
| CADD 136 | Intermediate AutoCAD | 40 hours | 3 |
| CEU 3168 | Forklift Training Safety and Code Certification | 8 hours | 0.8 CEU’s |
| ARCH 126 | Introduction to AutoCAD | 40 hours | 3 |
| ARCH 136 | Intermediate AutoCAD | 40 hours | 3 |
| EET 101A | Electronic Lab Skills & Equipment I | 30 hours | 1 |
| EET 101B | Electronic Lab Skills & Equipment II | 30 hours | 1 |
| EET 111 | Electrical Circuit Analysis I | 70 hours | 5 |
| EET 112 | Electrical Circuit Analysis II | 70 hours | 5 |
| EET 113 | Electrical Power | 70 hours | 5 |
| EET 121 | Digital Systems I | 60 hours | 4 |
| EET 188 | Industrial Safety | 20 hours | 2 |
| ELT 125 | Basic Programmable Controllers (PLC’s) | 33 hours | 2 |
| ELT 126 | Intermediate Programmable Controllers (PLC’s) | 33 hours | 2 |
| ELT 204 | Adjustable Speed Drives | 33 hours | 2 |
| ELT 220 | OSHA 30 Hour Safety Training | 33 hours | 3 |
| ELT 225 | Advanced Programmable Controllers | 33 hours | 2 |
| FMT 100 | Intro to Facilities Maintenance Systems | 33 hours | 2 |
| FMT 101 | Refrigeration I | 33 hours | 2 |
| FMT 102 | Refrigeration II | 33 hours | 2 |
| FMT 103 | Refrigeration III | 33 hours | 2 |
| FMT 111 | Refrigeration Electrical I | 33 hours | 2 |
| FMT 112 | Refrigeration Electrical II | 33 hours | 2 |
| FMT 113 | Refrigeration Electrical III | 33 hours | 2 |
| FMT 119 | Water Treatment and Distribution | 33 hours | 2 |
| FMT 122 | Intro to Boilers | 33 hours | 3 |
| FMT 125 | Natural Gas Equipment | 33 hours | 2 |
| FMT 177 | Intro to Applied Technologies for the Trades | 33 hours | 3 |
| FMT 201 | Intro to Chillers | 33 hours | 3 |
| FMT 202 | Direct Digital Controls | 33 hours | 3 |
| FMT 207 | Pneumatic Controls | 33 hours | 2 |
| FMT 210 | Basic HVAC/R Installation and Techniques | 33 hours | 2 |
| FMT 222 | Intermediate Boilers | 33 hours | 3 |
| MCH 100 | Machine Tool Basics | 20 hours | 1 |
| MCH 110B | Blueprint Reading for Machine Manufacturing | 60 hours | 3 |
| MCH 120 | Machine Shop Math | 40 hours | 2 |
| MCH 245 | Metallurgy | 50 hours | 2.5 |
| MCH 272 | Mastercam Level I | 100 hours | 5 |
| MCH 273 | Mastercam Level II | 100 hours | 5 |
| MTH | Any 3 credit or more MTH 60 or above | hours vary | credits vary |
| WLD 101 | Welding Processes & Applications | 40 hours | 4 |
| WLD 102 | Blueprint Reading | 44 hours | 4 |
7th and 8th period apprentices only
| Course # | Title | Approximate Hours | Credits |
|---|---|---|---|
| CEU 921Z | National Electrical Code Changes | 8 hours | 0.8 CEU’s |
| CEU 922A | NEC Code Calculations. for Motors & Transformers | 8 hours | 0.8 CEU’s |
| CEU 3263 | Electrical Safety/NFPA 70E | 8 hours | 0.8 CEU’s |
LBME
MA #1176 Metro Limited Building Maintenance Electrician (LBME) JATC approved elective list
| Course # | Title | Approximate Hours | Credits |
|---|---|---|---|
| APR 101 | LME: Electrical Theory Fundamentals | 33 Hours | 3 |
| APR 102 | LME: DC Motors | 33 Hours | 3 |
| APR 103 | LME: AC Motors & Transformers | 44 hours | 4 |
| APR104 | LME: Luminaries & Equipment | 33 hours | 3 |
| APR 121 | Introduction to Electricity and Circuits | 33 hours | 3 |
| APR 122 | AC/DC Motor Principles | 33 hours | 3 |
| APR 123 | AC Theory for Motors and Transformers | 44 hours | 4 |
| APR 124 | Electrical Systems Operations | 33 hours | 3 |
| APR 125 | Elect. Circuits/Wiring Methods | 33 hours | 3 |
| APR 160 | Intro to Industrial Maintenance | 44 hours | 4 |
| APR 162 | Calculations for the Trades | 44 hours | 4 |
| APR 164 | Industrial Blueprints & Schematics for the Trades | 33 hours | 2 |
| APR 201 | Electrical Motor Controls | 33 Hours | 2 |
| APR 202 | LME: Electrical Code I | 44 Hours | 4 |
| APR 203 | LME: Electrical Code II | 44 Hours | 4 |
| APR 204 | LME: Electrical Code III | 44 Hours | 4 |
| APR 221 | Advanced AC Circuitry | 33 hours | 3 |
| APR 223 | Motor Control Operations Including PLC’s | 33 hours | 3 |
| APR 224 | Electrical Code – Level I | 44 hours | 4 |
| APR 225 | Electrical Code – Level II | 44 hours | 4 |
| APR 226 | Electrical Code – Level III | 44 hours | 4 |
| APR 230 | National Electrical Code | 33 hours | 3 |
| APR 266 | Predictive Maintenance Technologies | 44 hours | 4 |
| BCT 104 | Construction Math | 33 hours | 3 |
| BCT 106 | Hand/Power Tool Use and Safety | 66 hours | 3 |
| BCT 213 | Commercial Print Reading | 33 hours | 2 |
| CAS 133 | Basic Computer Skills/Microsoft Office | 44 hours | 4 |
| CEU 925P | COYNE 1st Aid/CPR (Required annually) | 8 hours | 0.8 CEU’s |
| CEU 3168 | Forklift Training Safety and Code Certification | 8 hours | 0.8 CEU’s |
| COMM 100 | Intro to Speech Communication | 40 hours | 4 |
| CMET 112 | Technical Algebra/Trigonometry | 44 hours | 4 |
| EET 101 | Introduction to Elect. Test Equipment | 30 hours – lab | 1 |
| EET 121 | Digital Systems I (24hrs lecture+33hrs lab max) | 57 hours | 3 |
| ELT 110 | Electricity for the Non-Electricians I | 33 hours | 2 |
| ELT 120 | OSHA 10 Hour Safety Training | 10 hours | 1 |
| ELT 125 | Basic Programmable Controllers (PLC’s) | 33 hours | 2 |
| ELT 126 | Intermediate Programmable Controllers (PLC’s) | 33 hours | 2 |
| ELT 204 | Adjustable Speed Drives | 33 hours | 2 |
| ELT 210 | Electricity for the Non-Electricians II | 33 hours | 2 |
| ELT 220 | OSHA 30 Hour Safety Training | 33 hours | 3 |
| ELT 225 | Advanced Programmable Controllers | 33 hours | 2 |
| ELT 226 | Basic Human Machine Interface | 33 hours | 2 |
| FMT 111 | Refrigeration Electrical I | 33 hours | 2 |
| FMT 112 | Refrigeration Electrical II | 33 hours | 2 |
| FMT 113 | Refrigeration Electrical III | 33 hours | 2 |
| FMT 202 | Direct Digital Controls | 33 hours | 3 |
| MTH | Any 3 credit or more PCC Math class | hours vary | credits vary |
| MTH 20 | Basic Math | 44 hours | 4 |
| MTH 58 | Math Literacy I | 44 hours | 4 |
| MTH 60 | Introductory Algebra – 1st Term | 44 hours | 4 |
| MTH 61 | Introductory Algebra-Part I | 33 hours | 3 |
| MTH 62 | Introductory Algebra-Part II | 33 hours | 3 |
| MTH 63 | Introductory Algebra-Part III | 33 hours | 3 |
| MTH 65 | Introductory Algebra – 2nd Term | 44 hours | 4 |
| MTH 70 | Review of Intro Algebra | 44 hours | 4 |
| MTH 75 | Intro to Formal Geometry | 44 hours | 4 |
| MTH 95 | Intermediate Algebra | 44 hours | 4 |
| MTH 105 | Explorations in Mathematics | 44 hours | 4 |
| MTH 111C | College Algebra for Math, Science, Engineering | 55 hours | 5 |
| MTH 111H | College Algebra for Math, Science, Engineering – Honors | 55 hours | 5 |
| MTH 112 | Elementary Functions | 55 hours | 5 |
| MTH 211 | Foundations of Elementary Math I | 44 hours | 4 |
| MTH 212 | Foundations of Elementary Math II | 44 hours | 4 |
| MTH 213 | Foundations of Elementary Math III | 44 hours | 4 |
| MTH 241 | Calculus for Management, Life and Social Science | 44 hours | 4 |
| MTH 243 | Statistics I | 55 hours | 5 |
| MTH 244 | Statistics II | 44 hours | 4 |
| MTH 251 | Calculus I | 44 hours | 4 |
| MTH 252 | Calculus II | 55 hours | 5 |
| MTH 253 | Calculus III | 55 hours | 5 |
| MTH 254 | Vector Calculus I | 55 hours | 5 |
| MTH 256 | Differential Equations | 55 hours | 5 |
| MTH 261 | Applied Linear Algebra I | 55 hours | 5 |
| PHY 101 | Fundamentals of Physics I | 44 hours | 4 |
| SC 11A | Applied Math – A Day Math | hours vary | 4 |
| SC 11B | Applied Math – B Evening Trade Math | hours vary | 2 |
| WLD 101 | Welding Process & Application | 40 hours | 4 |
| WLD 176B | Basic Fabrication Welding Practice | 30 hours | 3 |
| WLD 186 | Beginning Certification Welding (1 of 4 Courses) | 30 hours | 3 |
LME and SE
MA #1040 Metro Limited Maintenance Electrician (LME) and Stationary Engineer (SE) JATC approved elective list
LME Apprentices can take any class listed except those specifically identified for Stationary Engineers. Online (no scheduled meeting) classes are not accepted except those identified below.
| Course # | Title | Approximate Hours | Credits |
|---|---|---|---|
| ART 294A | Sculpture Welding: Metals | 40 hours | 3 |
| APR 121 | Introduction to Electricity and Circuits | 33 hours | 3 |
| APR 122 | AC/DC Motor Principles | 33 hours | 3 |
| APR 123 | AC Theory for Motors and Transformers | 44 hours | 4 |
| APR 124 | Electrical Systems Operations | 33 hours | 3 |
| APR 125 | Elect. Circuits/Wiring Methods | 33 hours | 3 |
| APR 126 | Electrical Systems Installation per NEC | 33 hours | 3 |
| APR 160 | Intro to Industrial Maintenance | 44 hours | 4 |
| APR 162 | Calculations for the Trades | 44 hours | 4 |
| APR 164 | Industrial Blueprints & Schematics for the Trades | 33 hours | 2 |
| APR 166 | Industrial Rigging | 33 hours | 3 |
| APR 168 | Intro to Bearings, Seals & Lubrication | 33 hours | 3 |
| APR 170 | Power Transmission Systems | 33 hours | 3 |
| APR 172 | Introduction to Hydraulics | 33 hours | 3 |
| APR 221 | Advanced AC Circuitry | 33 hours | 3 |
| APR 222 | Hazardous Locations | 33 hours | 3 |
| APR 223 | Motor Control Operations Including PLC’s | 33 hours | 3 |
| APR 260 | Pneumatic System Operations | 44 hours | 4 |
| APR 264 | Mechanical Drive Alignment | 33 hours | 3 |
| APR 266 | Predictive Maintenance Technologies | 44 hours | 4 |
| APR 268 | Industrial Equipment Controls | 33 hours | 3 |
| APR 272 | Machining for Industrial Maintenance | 33 hours | 3 |
| APR 274 | HVAC, Steam & Hot Water Systems | 44 hours | 4 |
| BCT 104 | Construction Math | 33 hours | 3 |
| BCT 106 | Hand/Power Tool Use and Safety | 66 hours | 3 |
| BCT 150 | Mechanical, Electrical and Plumbing | 40 hours | 4 |
| BCT 213 | Commercial Print Reading | 33 hours | 2 |
| CEU 925P | COYNE 1st Aid/CPR (Required Annually & Does not meet full term elective requirement) | 8 hours | 0.8 CEU’s |
| CEU 3168 | Forklift Training Safety (Does not meet full term elective requirement) | 8 hours | 0.8 CEU’s |
| COMM 100Z | Introduction to Communication | 40 hours | 4 |
| CADD 100 | CADD Orientation | 30 hours | 3 |
| CADD 126 | Intro to AutoCAD | 40 hours | 3 |
| CADD 136 | Intermediate AutoCAD | 40 hours | 3 |
| EET 101A | Electronic Lab Skills & Equipment I | 30 hours | 1 |
| EET 101B | Electronic Lab Skills & Equipment II | 30 hours | 1 |
| EET 111 | Electrical Circuit Analysis I | 70 hours | 5 |
| EET 112 | Electrical Circuit Analysis II | 70 hours | 5 |
| EET 113 | Electrical Power | 70 hours | 5 |
| EET 121 | Digital Systems I (24hrs lecture+33hrs lab max) | 57 hours | 3 |
| EET 188 | Industrial Safety | 20 hours | 2 |
| ELT 110 | Introduction to Residential Electrical Wiring (Evening time section only) | 50 hours | 3 |
| ELT 204 | Adjustable Speed Drives | 33 hours | 2 |
| ENGR 100 | Exploring Engineering | 10 hours | 1 |
| ENGR 101 | Engineering Fundamentals | 60 hours | 4 |
| FMT 111 | Refrigeration Electrical I | 33 hours | 2 |
| FMT 112 | Refrigeration Electrical II | 33 hours | 2 |
| FMT 113 | Refrigeration Electrical III | 33 hours | 2 |
| FMT 202 | Direct Digital Controls | 33 hours | 3 |
| FMT 210 | Basic HVAC/R Installation & Techniques | 33 hours | 2 |
| FMT 265 | Building Commissioning I | 33 hours | 3 |
| HUM 100 | Intro to Humanities | 40 hours | 4 |
| HUM 221 | Leadership Development (JATC Pre-Requisite HUM 100) | 40 hours | 4 |
| MCH 100 | Machine Tool Basics | 20 hours | 1 |
| MCH 110B | Blueprint Reading for Machine Manufacturing | 60 hours | 3 |
| MCH 120 | Machine Shop Math | 20 hours | 2 |
| MTH | Any 3 credit or more PCC Math class | hours vary | credits vary |
| PHY 100 | Everyday Physics | 30 hours | 4 |
| WLD 101 | Welding Process & Application | 40 hours | 4 |
| WLD 176A | Beginning Fabrication Welding Practice | 60 hours | 3 |
| WLD 176B | Basic Fabrication Welding Practice | 60 hours | 3 |
| WLD 186A | Beginning Certification Welding (1 of 4 Courses) | 60 hours | 3 |
Second year apprentice
| Course # | Title | Approximate Hours | Credits |
|---|---|---|---|
| APR 224 | Electrical Code – Level I | 44 hours | 4 |
| APR 225 | Electrical Code – Level II | 44 hours | 4 |
| APR 226 | Electrical Code – Level III | 44 hours | 4 |
| APR 227 | NEC Review and Exam Preparation | 33-36 hours | 3 |
| APR 230 | National Electrical Code | 33 hours | 3 |
| CEU 3263 | Electrical Safety/NFPA 70E (Does not meet full term elective requirement) | 8 hours | 0.8 CEU’s |
| CEU 921Z | National Electrical Code Changes (Does not meet full term elective requirement) | 8 hours | 0.8 CEU’s |
| CEU 922A | NEC Code Calc. for Motors and Transformers (Does not meet full term elective requirement) | 8 hours | 0.8 CEU’s |
| ELT 125 | Basic Programmable Controllers (PLC’s) | 33 hours | 2 |
| ELT 126 | Intermediate Programmable Controllers (PLC’s) | 33 hours | 2 |
| ELT 225 | Advanced Programmable Controllers | 33 hours | 2 |
Stationary Engineers only
| Course # | Title | Approximate Hours | Credits |
|---|---|---|---|
| FMT 100 | Intro to Facilities Maintenance Technology | 33 hours | 2 |
| FMT 119 | Water Treatment & Distribution | 33 hours | 2 |
| FMT 125 | Natural Gas Equipment | 33 hours | 2 |
| FMT 201 | Intro to Chiller Systems | 33 hours | 3 |
| FMT 204 | Heat Pumps | 33 hours | 3 |
MW and IMM
MA #1146 Pacific Northwest Industrial Maintenance & Millwright JATC approved elective list
Industrial Millwright (MW) and Industrial Maintenance Mechanic (IMM)
| Course # | Title | Approximate Hours | Credits |
|---|---|---|---|
| APR 121 | Introduction to Electricity and Circuits | 33 hours | 3 |
| APR 122 | AC/DC Motor Principles | 33 hours | 3 |
| APR 123 | AC Theory for Motors and Transformers | 44 hours | 4 |
| APR 124 | Electrical Systems Operations | 33 hours | 3 |
| APR 125 | Elect. Circuits/Wiring Methods | 33 hours | 3 |
| APR 126 | Electrical Systems Installation per NEC | 33 hours | 3 |
| APR 221 | Advanced AC Circuitry | 33 hours | 3 |
| APR 222 | Hazardous Locations | 33 hours | 3 |
| APR 223 | Motor Control Operations Including PLC’s | 33 hours | 3 |
| APR 224 | Electrical Code – Level I | 44 hours | 4 |
| APR 225 | Electrical Code – Level II | 44 hours | 4 |
| APR 226 | Electrical Code – Level III | 44 hours | 4 |
| APR 227 | NEC Review and Exam Preparation | 33-36 hours | 3 |
| APR 230 | National Electrical Code | 33 hours | 3 |
| ARCH 112 | Intro to Commercial Construction Documents | 40 hours | 4 |
| ART 294A | Sculpture Welding: Metals | 40 hours | 3 |
| BCT 104 | Construction Math | 33 hours | 3 |
| BCT 106 | Hand/Power Tool Use and Safety | 66 hours | 3 |
| BCT 150 | Mechanical, Electrical and Plumbing | 40 hours | 4 |
| BCT 213 | Commercial Print Reading | 33 hours | 2 |
| BCT 222 | Engineering for Constructors | 30 hours | 3 |
| CADD 100 | CADD Orientation | 30 hours | 3 |
| CADD 126 | Intro to AutoCAD | 40 hours | 3 |
| CADD 136 | Intermediate AutoCAD | 40 hours | 3 |
| CEU 3168 | Forklift Training Safety and Code Certification | 8 hours | 0.8 CEU’s |
| CEU 3263 | Electrical Safety/NFPA 70E | 8 hours | 0.8 CEU’s |
| CEU 3891 | Essential Hydraulic I (offered through private vendor) | 36 hours | 3.6 CEU’s |
| CEU 3892 | Essential Hydraulic II (offered through private vendor) | 32 hours | 3.2 CEU’s |
| DST 110 | Caterpillar Engine Fundamentals | 80 hours | 8 |
| DST 111 | Intro to Caterpillar Service Industry | 30 hours | 3 |
| DST 112 | Caterpillar Hydraulic Fundamentals | 40 hours | 4 |
| DST 113 | Caterpillar Engine Fuel Systems | 40 hours | 4 |
| DST 117 | Caterpillar Machine Hydraulic Systems | 80 hours | 4 |
| EET 101A | Electronic Lab Skills & Equipment I | 30 hours | 1 |
| EET 101B | Electronic Lab Skills & Equipment II | 30 hours | 1 |
| EET 111 | Electrical Circuit Analysis I | 70 hours | 5 |
| EET 112 | Electrical Circuit Analysis II | 70 hours | 5 |
| EET 113 | Electrical Power | 70 hours | 5 |
| EET 121 | Digital Systems I (24hrs lecture+33hrs lab max) | 57 hours | 3 |
| EET 188 | Industrial Safety | 20 hours | 2 |
| ELT 125 | Basic Programmable Controllers (PLC’s) | 33 hours | 2 |
| ELT 126 | Intermediate Programmable Controllers (PLC’s) | 33 hours | 2 |
| ELT 204 | Adjustable Speed Drives | 33 hours | 2 |
| ELT 220 | OSHA 30 Hour Safety Training | 33 hours | 3 |
| ELT 225 | Advanced Programmable Controllers | 33 hours | 2 |
| ENGR 100 | Exploring Engineering | 10 hours | 1 |
| ENGR 101 | Engineering Fundamentals | 60 hours | 4 |
| ENGR 213 | Strength of Materials | 40 hours | 4 |
| FMT 100 | Intro to Facilities Maintenance Technology | 33 hours | 2 |
| FMT 101 | Refrigeration I | 33 hours | 2 |
| FMT 102 | Refrigeration II | 33 hours | 2 |
| FMT 103 | Refrigeration III | 33 hours | 2 |
| FMT 111 | Refrigeration Electrical I | 33 hours | 2 |
| FMT 112 | Refrigeration Electrical II | 33 hours | 2 |
| FMT 113 | Refrigeration Electrical III | 33 hours | 2 |
| FMT 119 | Water Treatment & Distribution | 33 hours | 2 |
| FMT 122 | Introduction to Boilers | 33 hours | 3 |
| FMT 125 | Natural Gas Equipment | 33 hours | 2 |
| FMT 177 | Intro to Applied Technologies for the Trades | 33 hours | 3 |
| FMT 201 | Intro to Chiller Systems | 33 hours | 3 |
| FMT 202 | Direct Digital Controls | 33 hours | 3 |
| FMT 207 | Pneumatic Controls | 33 hours | 2 |
| FMT 210 | Basic HVAC/R Installation & Techniques | 33 hours | 2 |
| FMT 222 | Intermediate Boilers | 33 hours | 3 |
| MCH 100 | Machine Tool Basics | 20 hours | 1 |
| MCH 110B | Blueprint Reading for Machine Manufacturing | 60 hours | 3 |
| MCH 120 | Machine Shop Math | 20 hours | 2 |
| MCH 180 | Turning Machines & Operations | 80 hours | 4 |
| MCH 222 | CMM Operation | 40 hours | 2 |
| MCH 245 | Metallurgy | 50 hours | 2.5 |
| MCH 272 | Mastercam Level I | 100 hours | 5 |
| MCH 273 | Mastercam Level II | 100 hours | 5 |
| MTH | Any 3 credit or more MTH 60 or above | hours vary | credits vary |
| WLD | Any credit Welding class (Not counted as core courses) | hours vary | credits vary |
IMM apprentices only
| Course # | Title | Approximate Hours | Credits |
|---|---|---|---|
| APR 268 | Industrial Equipment Controls | 33 hours | 3 |
| APR 272 | Machining for Industrial Maintenance | 33 hours | 3 |
| APR 274 | HVAC, Steam and Hot Water Systems | 44 hours | 4 |
MW apprentices only
| Course # | Title | Approximate Hours | Credits |
|---|---|---|---|
| APR 101 | LME: Electrical Theory Fundamentals | 33 hours | 3 |
| APR 102 | LME: DC Motors | 33 hours | 3 |
| APR 103 | LME: AC Motors and Transformers | 44 hours | 4 |
| APR 104 | LME: Luminaires and Equipment | 33 hours | 3 |
| APR 202 | LME: Electrical Code – Level l | 44 hours | 4 |
| APR 203 | LME: Electrical Code – Level ll | 44 hours | 4 |
| APR 204 | LME: Electrical Code – Level lll | 44 hours | 4 |