Automotive Service & Machine Manufacturing Technology Information Session Schedule

Machine Manufacturing Technology and Automotive Service Technology have very specific requirements in regards to tools, scheduling and time commitment, so it is required that any student wanting to participate in either program attend an information session. You do not need to RSVP, just show up!

Please remember that you must pay to park on any PCC Campus.  Short-term Parking Permits can be found at kiosks around each campus, check the campus map to find parking closest to the information session venue.

Information sessions

All Sylvania Campus Information Sessions will take place in AM 204, which can be entered from the West side of the Automotive Metals (AM) Building. The door will typically be locked until 10 minutes before the session. Please do not arrive late.

Sylvania Campus  Automotive Metals (AM) 204
Date Time
Tuesday, June 12 Automotive Service  5:00 PM to 5:45 PM
Machine Manufacturing  5:45 PM to 6:30 PM
Wednesday, June 20 Automotive Service  5:00 PM to 5:45 PM
Machine Manufacturing  5:45 PM to 6:30 PM
Tuesday, June 26 Automotive Service  5:00 PM to 5:45 PM
Machine Manufacturing  5:45 PM to 6:30 PM
Tuesday, July 10 Automotive Service  5:00 PM to 5:45 PM
Machine Manufacturing  5:45 PM to 6:30 PM
Wednesday, July 18 Automotive Service  5:00 PM to 5:45 PM
Machine Manufacturing  5:45 PM to 6:30 PM
Tuesday, July 24 Automotive Service  5:00 PM to 5:45 PM
Machine Manufacturing  5:45 PM to 6:30 PM
Wednesday, August 1 Automotive Service  5:00 PM to 5:45 PM
Machine Manufacturing  5:45 PM to 6:30 PM
Tuesday, August 7 Automotive Service  5:00 PM to 5:45 PM
Machine Manufacturing  5:45 PM to 6:30 PM

Friday Information Sessions at other campuses

Cascade Campus Terrell Hall 100
Date Time
Friday, May 11 Automotive Service  12:00 PM -12:30 PM
Machine Manufacturing 12:30 PM-1:00 PM

Rock Creek Campus Building 2 Rm 108
Date Time
Friday, May 25 Automotive Service  12:00 PM -12:30 PM
Machine Manufacturing 12:30 PM-1:00 PM

Southeast Campus -SCOM 318
Date Time
Friday, June 1 Automotive Service  12:00 PM -12:30 PM

Machine Manufacturing 12:30 PM-1:00 PM

If you are interested in starting either program in Spring, please submit the program application no later than March 26, and then watch your MyPCC email for next steps.

If you are interested in Fall term, you may submit the program application at any time, and attend an information session when they are next scheduled.

Information sessions for Fall will begin around the end of April. Fall fills up rather quickly, so you will need to submit your application AND attend an information session early to be at the top of the list.